Company
Benefits
Technology
Applications
Brochures
Address
Membrane modulesTechnology
Technology
The MaxFlow membrane filtration module is a patented, innovative technology for the use in membrane bioreactor processes (MBR), in the tertiary treatment of wastewater treatment plant effluent, and for blank filtration of water and wastewater .
  • Due to the use of durable and chemically stable membrane materials (PES / PVDF), the MaxFlow membrane module has a high filtration performance with low fouling potential. By using low differential operating pressures, scaling is effectively prevented.
  • The innovative MaxFlow module „open channel design“ provides optimal biofilm control and minimizes the quantity of chemical cleaning procedures. Multi-module arrangements guarantee extremely high energy efficiency plus a high packing density per square meter. This further reduces plant operating costs.
  • The compact module design enables multi-stack module arrangements using shallow water levels. Therefore, a future plant upgrade to increase capacity is easy to implement.
  • The MaxFlow membrane module is resistant to clogging due to its open-channel design. A simple screen or settling tank is sufficient as pre-treatment.
  • The MaxFlow filtration modules can be cleaned inside the process tank using the „cleaning in place” (CIP) method. Depending on the wastewater source, cleaning intervals range between 2-6 months. The modules may also be cleaned outside the process tank if desired.
  • The robust design and the safe, easy handling of MaxFlow membrane modules allow for simple plant layouts.
  • Most existing conventional treatment plants can be retrofitted with Maxflow membranes due to the flexible and compact nature of our membrane module design.

Membrane material
Filtration systemUltrafiltration
U70, U20, U06
Microfiltration
M70, M20, M06
Membrane materialPES PVDF
Cut-off, pore size150 kDa0,2 μm
Permaebility, pure water> 300 l/(m²*h*bar) 1000 l/(m²*h*bar)


Operation data
Operation parameters
Flux rate, activated sludge*

15 - 30 l/(m²*h)

MLSS

8 - 15 g/l

Operating pressure

20 - 250 mbar

Back wash pressure

< 50 mbar

Temperature range

5 - 50 °C

  
Cleaning
Cleaning agents**

bases, oxidants, tensides, acids

Cleaning period

dependant on sewage, normally 2-4 times per year

pH cleaning

2 - 11 (max. 30 °C)

  
Aeration
Tube diffusers

medium-sized bubbles

Aerator channel hight without legs

ca. 440 mm

Aerator channel hight with legs

ca. 740 mm

Pressure loss of diffusers

ca. 80 mbar

  
Module data
Design of filter bags

plate membrane, sandwich

Grouting

wastewater resistant plastics

Housing

protective PVC plates

Operation

continuous
cyclic
pumped
gravity flow

Number of filtrate connections

2


* dependent on activated sludge
** see O&M manual

Module data
Module

U70-003
M70-003

U20-002
M20-002

U06-001
M06-001

Membrane surface ca.

70 m²

20 m²

6 m²

Width ca. ± 2,5

736 mm

385 mm

185 mm

Hight ca. ± 0,0

1070 mm

1058 mm

1090 mm

Depth without filtration pipe ca. ± 2,5

716 mm

466 mm

316 mm

Dry weight ca.

160 kg

66  kg

36 kg

Filtrate pipe

DN 50

DN 25

DN 16

Air demand per footprint (ca.)

48 Nm³/h

16 Nm³/h

4,8 Nm³/h






BENEFITS
TECHNOLOGY
APPLICATIONS